HANDMADE RESIN RINGS

 

 

every ring is unique, just like each of us !

 

 

Resin rings and are unique handmade creations.

The effects of shades of epoxy resin, when colored, are influenced by many factors in the realization phase, for example temperature, the amount of pigment but also the mixing of colors.
Just like wood, which is a heterogeneous material by nature: at any point of the trunk there will always be different characteristics, such as the direction of the grain, the compactness of the fiber, etc..

For these reasons each ring is truly unique and not reproducible.

 

READ MORE

CHOOSE YOUR RING STARTING FROM THE SIZE

The rings proposed in this section are unique pieces, ready-made and refer to a specific size, which cannot be changed.
All ring sizes on this site correspond to their inside diameter: this measurement is not a jeweler’s size.
Need help? You can read the guide: how to choose the right size?

For custom resin rings, you can contact me: we will check the possibility of realization together, and I will provide all the necessary information.

Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
8,00 
17,00 

MORE INFO

WHY RESIN?

Resin is a fantastic material.

It has, as a base, absolute transparency but it can be colored using liquid inks or powder pigments, also mixable with each other, forming games of beautiful colors.
With over 30 varieties of colors available, the color tones and end effects are almost endless.
In addition, it is non-toxic, very durable and there is no need to apply a protective paint over it: its shine, in fact, is obtained by professional polishing in the production phase.
You can learn more about epoxy by reading the wikipedia page on this material: epoxy resin.

Anelli in resina e legno

The production process of a resin ring

The realization of a resin ring requires particular care because, during its production process, the resin deforms with the heat produced by the turning tools.
Special techniques are employed to prevent this, and the ring is thus set and roughened.
Then we proceed to the finishing, completely handmade with wet abrasives, starting from coarse to excellent grits.
Once all surface scratches have been removed, the ring is prepared for the last phase: polishing, always by hand, using professional abrasive polishes, with techniques developed specifically for rings. 

Incorporate different materials

Did you know that different materials can be incorporated into the resin?
Pine needles, sand, fabric, wood shavings, flower petals….. there is no limit to imagination and creativity!

This is another reason why resin represents a unique material to work with, and it is possible to make truly amazing handcrafted creations.
You can choose the material to incorporate, and I will implement your wonderful idea.

Creativity is the expression of our imagination

 

 

Resin rings with logo

Do you have a logo or symbol that represents you? Or would you simply like the initials of your/our name?
Choose to customize it and make it unique in the world.
You can choose either the base color of the ring, or the color to make the logo, just be careful that the two colors have a little ‘contrast between them, so that the logo can stand out well on the ring.
If you have an idea in mind, don’t hesitate to contact me and we’ll consider the possibility together.

every ring is unique, just like each of us !

 

DO YOU WANT A CUSTOM RESIN RING?

IF YOU ALREADY HAVE AN IDEA OR WOULD LIKE MORE INFORMATION, CONTACT ME AND WE WILL CHECK THE POSSIBILITY TOGETHER.

CONTACT ME: I will answer you immediately

 

Share this page