Custom wooden ring

You choose the woods you like best, decide if you want to apply a central or lateral insert: I will make it for you! 
Scroll through the images to see some examples, then use the configurator to customize it.
It is rounded at the edges, which is why it is comfortable when worn. 

Protected with oil-based impregnating agent, finished with non-toxic, natural and resistant varnish, based on shellac, and other natural resins.
Customize the type of finish you like best: glossy, matte or satin.
You can also decide to print the initials of the name or a full name – your name ring! 

This ring is normally shipped in 3-4 working days, delivered by express courier, in 48-72 hours in the main EU locations.
Add the product to the cart to view the shipping methods and costs.

 

26,00 

SKU: GA18PP001 Category:

  • Handmade
  • Quality guaranteed
  • Customizable

  • CUSTOMIZE IT!

    ATTENTION: the size represents the inner diameter of the ring.
    This measurement does NOT correspond to the jeweler's size. Need help?
    Choose Custom for sizes not listed.
    Do you still have doubts? I recommend the ring size kit, to be able to measure the size directly at your home!

    *Size (mm)

    *Custom size (mm)

    I am aware that the size entered is correct.
    I understood that the size refers to the internal diameter and that it does not represent the jeweler's size.

    You can choose a single wood species or combine two woods together. Scroll through the product images to see some examples

    *Number of woods

    *Wood 1

    • +

    *Wood 2

    • +

    You can choose whether to have a central insert or a side insert (or in both sides). Only a few essences selected for chromatic consistency are available.
    Scroll through the product images to see some examples.

    *Insert

     

    • +

    *Wood for the insert

     

    Choose between matte, glossy or satin (something in between)

    *Finishing

    Attention: widths under 7 mm make the ring very fragile. I recommend a width of at least 7 mm or alternatively choose the consolidating treatment below.

    *Ring width (mm)

    • +

    * Custom width

    ATTENTION: prefer light woods because there is more contrast, on dark woods the ink transfer is not seen or very little.
    The name is preferable to be as short as possible. For long names choose initials only. In the case of selecting 2 quantities, the engravings / prints will be practiced diametrically opposite each other.
    Ink transfer or engraving will be subject to prior verification and approval. 
    Need help? Read about personalized engraved wooden rings.

    Laser engraving (external only)

    *Quantity

    *Indicate the letter / name (1)

    *Indicate the letter / name (2)

    Ink transfer (internal only)

    *Quantity

    *Indicate the letter / name (1)

    *Indicate the letter / name (2)

    Additional indications

    Optional: you can import your lettering / symbol file here

    SVG / AI / PDF or JPG / PNG high resolution formats - For more files use ZIP

     
    • (max file size 64 MB)

    The consolidating treatment of the wood considerably increases the resistance of your ring.
    This processing takes an additional 1 business day to manufacture.

    More information can be found here: The Strength Of A Wooden Ring

    *Consolidating treatment

    Additional information

    Each ring is shipped in a cardboard box, with a guarantee seal.
    To protect your ring you can add a protective box or a gift box by choosing from the proposals below, or contact me if you want a completely customized wooden box.

    Octagonal box

    Octagonal shaped box made with a professional 3D printer.
    More info here:  Octagonal Box

    Gift box

    Box gift-shaped, with bow, made with a professional 3D printer.
    More info here:  Gift box

    Wooden box with laser engraving

    Are you looking for a really surprising and customizable wooden box with laser engraving?
    Attention: This product must be configured and added to cart separately, otherwise it will not be shipped.
    You can customize it here:  Wooden gift box!

x

Custom wooden ring, handmade

This unisex ring is made on a lathe with fine solid wood, customized to your preferences.
Elegant and refined, this wooden ring has a rounded shape and bevel on the edges, which allows it to be worn comfortably on the finger. Men, generally less accustomed to wearing jewelry, will also find it comfortable.

Engagement Ring – Wedding Ring

This wooden band is suitable as an engagement ring or as a wedding ring: a personalized and virtually unique ring, like love.

 Natural finish: eco-sustainability of the ring

 The finish is resistant, made with natural shellac and buffered, according to an ancient technique used in the past for the production of fine furniture.
 Depending on the desired choice, after polishing, the ring is then opaque or satin-finished.
 Before finishing, the wood underwent a protective impregnated treatment, also handcrafted in the laboratory.
The ring is water resistant. Avoid contact with alcohol or solvents in general which could dissolve the finishing layer or damage it.

Sizes

 The sizes normally available range from 16 to 21 mm: please note that these measurements do not correspond to those of the jeweler, but indicate the inner diameter of the ring. On request and without any surcharge, I also make oversized sizes, just choose the custom size when ordering and indicate the value in the appropriate field.
Need help choosing your size?
You can read this short guide on how to choose the right size or evaluate the purchase of the size kit to measure it directly at home!

 

 Is my ring strong / resistant?


Wood, for obvious reasons, does not have the strength of metal. Some essences are more resistant than others. To meet a need for strength and resistance, it is possible to apply a consolidating treatment to the wood by means of dissolved acrylic resin, applied in the vacuum chamber.
This treatment greatly increases the resistance.
For more information you can refer to this page: The Strength Of A Wooden Ring

Are you looking for a gift box?

 Each ring is shipped in a cardboard box, closed with a guarantee seal.
 For a truly surprising effect I have created, as a complement to the rings, a box made entirely of wood, which you can customize with a laser engraving of your choice.
 Details and information at this link: ring gift box

Approfondimento: la realizzazione di un anello in legno

Every wooden ring I make is carefully handmade, and this takes time.
Do you want to know how a wooden ring is made? Read about making a wooden ring

 

 

2 reviews for Custom wooden ring

  1. paolo torresani

    Ho scelto una combinazione padouk ed ebano per il mio anello. Bellissimo soprattutto i riflessi contro la luce del sole ne mettono in risalto ogni sfumatura. La cura di Michele verso il cliente mi fa venir voglia di andare a trovarlo di persona presso la sua bottega.

    • Artamin

      Grazie di cuore Paolo,
      non c’è modo migliore per ricambiare il mio impegno.
      E si, ti aspetto volentieri anche per un caffè 🙂

  2. Rodolfo Giudici

    Un oggetto inusuale, un anello in legno, che qui si può personalizzare in moltissimi aspetti. Realizzazione di Michele impeccabile, e consegna a tempo di record. Ottimo rapporto qualità/prezzo!

    • Artamin

      Grazie Rodolfo, onorato che il mio lavoro sia stato così gradito!

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Do you need more information about this or other products?

Fill out the form and ask me everything, I will answer you immediately.

* indicates required field

Acceptable file types: doc,docx,pdf,txt,gif,jpg,jpeg,png,zip.
Maximum file size: 2mb.

The data entered will be processed for the purposes of the requested service (name and email address in order to respond to your request, IP address and user-agent for spam control). You can read the entire information here: Privacy Policy

CAPTCHA

You may also like…